FACE DRILL RIG WD561 – MINI

WD561MINI

8200mm
×1300mm
×1600mm

Dimension (L×W×H)

4650mm/2250mm

Turning Radius (Outer/Inner)

4.4m (H)×5.3m(W)

Maximum Coverage Areas

ADVANTAGE INTRODUCTION

Suitable for excavation drilling and anchor rod drilling operations in mining tunnels, pumped storage power stations, hydropower stations, and irrigation tunnels of reservoirs ranging from 4m ² to 21m ².
Suitable for excavation drilling and anchor rod drilling operations in mining tunnels, pumped storage power stations, hydropower stations, and irrigation tunnels of reservoirs ranging from 4m ² to 21m ².
Equipped with 8kW rock drill, high working efficiency and low energy consumption; Adopting four-wheel drive, the chassis is equipped with 66kW engine power system; Configured with 55kW motor pump set, the hydraulic system has sufficient power to easily cope with various working conditions.
Main parameters Overall dimensions (L×W×H) 8200mm×1300mm×1600mm/2100mm
Total weight 8.5t
Turning radius outer/inner 4650mm/2250mm
Wheelbase 2000mm
Gradeability 15°(Max)
Driving speed 5km/h(Max)
Ground clearance 230mm
Minimum coverage area 1.9m(H)×1.9m(W)
Maximum coverage area 4.4m (H)×5.3m(W)
Rock drill Drill range φ32mm-φ55mm
Reaming range φ76mm-φ89mm
Height over drill centre 82mm
Length without shank 770mm
Impact power 8kW
Impact rate 40Hz
Rated hydraulic pressure 210bar
Maximum hydraulic pressure 230bar
Rotation system Separate rotation
Rotation speed 0~220rpm
Rotation torque, max 300Nm
Weight 95kg
Sound level <120dB(A)
Feed Model Standard Optional
Total length 4300mm 3810mm
Drill rod length 3090mm 2600mm
Hole depth 2800mm 2300mm
Weight, incl. drill 450kg 420kg
Feed force 7-15kN 7-15kN
Boom Boom swing angle L/R ±35°
Max. lifting angle -28°/+42°
Feed extension 1500mm
Feed roll-over 360°
Air system Working pressure 8bar
Working flow 410L/min
Water system Working pressure 8~12bar
Working flow 20~50L/min
Electrical system Total installed power 65kW
Main motor 55kW
Voltage 380V(Standard)

660V(Optional)

Frequency 50Hz(Standard)

60Hz(Optional)

Transformer 0.3kVA
Hydraulic system System pressure, max 230bar
Hydraulic oil tank, volume max 135L
Filtration 10μm
Approach angle 17°
Departure angle 17°
Fuel tank, volume 50L
Electric system 24V
Batteries 2×120Ah
Tramming lights 1×48W&2×30W
Working lights 2×100W
Drilling tools Drill rod R32-H32-R32-3090
Drill bit R32-φ41
Reaming drill bit R32-φ76
Shank R32

RECOMMENDED
PRODUCTS