| Parameters of the machine | |
| Total weight | 32000kg |
| Overall dimensions （Length×Width×Height） | 9200mmx3200mmx3500mm |
| Minimum construction section (W×H) | 5m×6m |
| Maximum construction section (W×H) | 18m×12m |
| Maximum walking speed | 15km/h |
| Maximum gradient climb | 35% |
| Approach angle | 16° |
| Turning radius | 11m |
| Departure angle | 16° |
| Minimum ground clearance | 400mm |
| Outrigger span (longitudinal) | 4400mm |
| Main working arm | |
| Control mode | Hydraulic control |
| Single arm rated load(kg) | 3000kg |
| Lifting working width | ±4m |
| Max. lifting height of main arm | 12m |
| Number of telescopic stages | Level 2 |
| Pitch angle | -20°~ +60° |
| Slewing angle | ±22° |
| Mid-arm gripper | |
| Maximum section width of steel section | 260mm |
| Clamping force (kg) | 1000kg |
| Pitch angle | -64°~ 22° |
| Jib gripper slewing angle | 10°~60° |
| Jib gripper side turning angle | -20°~+60° |
| Slewing angle | ±22° |
| Side arm | |
| Number of side arms (pcs) | 2 pcs |
| Single arm rated load (kg) | 1000kg |
| Maximum lifting height | 14m |
| Maximum width | 18m |
| Slewing angle | -12°~ +46° |
| Pitch angle | -20°~ +58° |
| Number of telescopic stages | Level 2 |
| Side arm manipulator slewing angle | -39°~69° |
| Side arm manipulator pitch angle | -5°~100 |
| Side arm rigid gripper | |
| Number of rigid grippers (pcs) | 2 pcs |
| Adapt to the maximum arch section width (mm) | 260mm |
| Single claw clamping force (kg) | 1000 |
| Pitch angle (°) | 0°~ 90° |
| Carrier | |
| Engine power (kW) | 96 |
| Fuel tank volume (L) | 180 |
| Front overhang | 1671mm |
| Rear overhang | 1521mm |
| Wheelbase | 4400mm |
| Front axle wheelbase | 2480mm |
| Rear axle wheelbase | 2480mm |
| Air compressor (optional) | |
| Discharge volume | 7m³/min |
| Pressure | 8bar |
| Rated power | 45kW |
| Rated voltage | 380V |
| Hydraulic system | |
| Hydraulic control mode | Load Sensitivity |
| Rated pressure of hydraulic pump | 250bar |
| Hydraulic oil pump displacement | 116L/min |
| Hydraulic oil tank volume | 360L |
| Pressure oil and return oil precision | 10μm |
| Electric system | |
| Main motor power | 37kW |
| Voltage /Frequency | 380V/50Hz |
Copyright (c) 2025 Uniroc. All Rights Reserved.
