| Parameters of the machine | |
| Total weight | 35500kg |
| Overall dimensions | 9400*3500*3550mm |
| Operating range (W×H) | 19m×12m |
| Maximum coverage area | 130m² |
| Minimum tunnel height | 6.5m |
| Maximum walking speed | 12.5km/h |
| Maximum climbing degree | 26% |
| Approach angle | 23° |
| Departure angle | 16° |
| Minimum ground clearance | 400mm |
| Outrigger span (longitudinal) | 4700mm |
| Main working arm | |
| Control mode | hydraulic control |
| Single arm rated load | 3000kg |
| Lifting working width | ±4m |
| Maximum lifting height of boom | 12m |
| Number of telescopic stages | Level 2 |
| Crank arm pitch angle | 5~100° |
| Boom pitch angle | -50~ +50° |
| Slewing angle | ±44° |
| Anchor System | |
| Single rod drilling depth | 4.5 m |
| Feed form | Aluminium alloy |
| Pushing method | Cylinder-Wire Rope |
| Applicable drilling diameter | 41~89mm |
| Rated impact power | 18 kW |
| Impact frequency | 60Hz |
| Impact pressure | 21MPa |
| Centre-arm gripper | |
| Maximum section width of the section | 260mm |
| Clamping force | 1000kg |
| Jib gripper slewing angle | -20~90° |
| Boom gripper swing angle | ±18° |
| Self-locking device | YES |
| Side arm | |
| Number of side arms (pcs) | 2 |
| Rated load of single arm | 1000kg |
| Maximum lifting height | 12m |
| Maximum width | 18m |
| Slewing angle | -10~ +47° |
| Pitch angle | -20~ +60° |
| Number of telescopic stages | Level 2 |
| Side arm manipulator slewing angle | -36~69° |
| Side-arm manipulator pitching angle | -5~100° |
| Number of telescopic stages | Level 1 |
| Side arm gripper | |
| Number of rigid grippers (pcs) | 2pcs |
| Adaptation to the maximum arch section width | 260mm |
| Single claw gripping force | 1000kg |
| Pitch angle | 0~ 90° |
| Self-locking device type | YES |
| Carrier | |
| Engine power | 96kW |
| Fuel tank capacity | 180L |
| Wheelbase | 4500mm |
| Driving form | Four wheel drive |
| Turning form | Front wheel steering |
| Hydraulic system | |
| Hydraulic control mode | Load sensitive |
| Rated pressure of hydraulic oil pump | 250bar |
| Hydraulic oil pump displacement | 210L/min(Electrical machinery)
116L/min（Carrier） |
| Hydraulic oil tank capacity | 460L |
| Pressure oil and return oil accuracy | 10μm |
| Electrical system | |
| Main motor power | 55kW |
| Cable model/length | 3*50+1*16/50m |
| Voltage/Frequency | 380V/50Hz |
| Security protection system functions | YES |
Copyright (c) 2025 Uniroc. All Rights Reserved.
