ROCK BOLTING RIG MT571

MT571

10300mm×1800mm
×2100/2900mm

Dimension (L×W×H)

5800mm
/3150mm

Turning Radius (Outer/Inner)

6.3m(H)×6.4m(W)

Maximum Coverage Areas

ADVANTAGE INTRODUCTION

Suitable for anchor rod support operations in non coal mines and water conservancy and hydropower tunnels of 9m ² -36m ², with a minimum working section of 3.2m x 3.2m and a maximum working section of 6.4m x 6.3m.
Suitable for anchor rod support operations in non coal mines and water conservancy and hydropower tunnels of 9m ² -36m ², with a minimum working section of 3.2m x 3.2m and a maximum working section of 6.4m x 6.3m.
Remote control electric proportional operating system, simple operation, easy to learn and understand, safe and reliable, accurate positioning; Universal modular chassis design, easy for equipment maintenance and management; Equipped with dual functions of resin and pipe seam anchor construction, one machine can be used for two purposes; Automatic drilling, automatic card braze release and other functions, improve the life of drilling tools; With fault self-diagnosis and safety voice alarm system;
Main parameters Overall dimensions (L×W×H) 10300mm×1800mm×2100/2900mm
Total weight 13.8t
Turning radius outer/inner 5800mm/3150mm
Wheelbase 2800
Gradeability 15°(Max)
Driving speed 15km/h(Max)
Ground clearance 255mm
Bolting Type Resin anchor bolts & Split-Set
Magazine capacity 10 根bolts
Minimum coverage area 3.2m(H)×3.2m(W) 
Maximum coverage area 6.3m(H)×6.4m(W) 
Rock drill Type U0825
Shank R32
Drill range φ32mm~φ55mm
Height over drill centre 82mm
Length without shank 770mm
Impact power 8kW
Impact rate 40Hz
Rated hydraulic pressure 210bar
Maximum hydraulic pressure 230bar
Rotation system Separate rotation
Rotation speed 0-220rpm
Rotation torque, max 300Nm
Weight 95kg
Sound level <120dB(A)
Bolting unit Bolt installation Auto
Control method Remote electro-proportional hydraulic control system
Bolt push 自动Auto
Size of face plates Rectangular 150mm x 150 mm(Max) 

Round Ø 200 mm(Max)

Bolt length 1.5m~2.4m(Optional)
Resin conveying system yes
Boom Boom extension 1250mm
Boom swing angle L/R ±35°
Max. lifting angle -30°/+65°
Feed extension 480mm
Feed roll-over 360°
Air system Working pressure 8bar
Working flow 410L/min
Water system Working pressure 8-12bar
Working flow 20~50L/min
Electrical system Total installed power 64.2kW
Main motor 55kW
Voltage 380V(Standard)

660V(Optional)

Frequency 50Hz(Standard)

60Hz(Optional)

Transformer 0.3kVA
Mining cables 80m
Hydraulic system Hydraulic pumps 1unit
System pressure, max 230bar
Hydraulic oil tank, volume max 240L
Return oil filter blockage alarm yes
Water cooled oil yes
Filtration 10μm
Carrier 铰接转向Articulated steering ±38°
接近角Approach angle 19°
离去角Departure angle 18°
燃油箱容积Fuel tank, volume 85L
电气系统Electric system 24V
行走灯Tramming lights 2×100W&2×30W
工作灯Working lights 6×30W

RECOMMENDED
PRODUCTS